Sub-GHz Remote

The SubGHz Remote Tool requires the creation of custom user map with .txt extension in the subghz/remote folder on the sdcard.

If these files are not exist or not configured properly, you will receive an error each time you try to select wrong file in the UniRF Tool.

You can add as many .txt map files as you want, file name doesn't matter!

Incorrect or unconfigured file error

If the .txt file has not been properly configured, the following error will be thrown when trying to run the UniRF Remix app:

Config is incorrect.

Please configure map

Press Back to Exit

Setting up the subghz/remote/example.txt file:

UP: /ext/subghz/Up.sub
DOWN: /ext/subghz/Down.sub
LEFT: /ext/subghz/Left.sub
RIGHT: /ext/subghz/Right.sub
OK: /ext/subghz/Ok.sub
ULABEL: Up Label
DLABEL: Down Label
LLABEL: Left Label
RLABEL: Right Label
OKLABEL: Ok Label

The UP/DOWN/LEFT/RIGHT/OK file locations must be set to the specific file you want mapped to that directional pad direction.

The ULABEL/DLABEL/LLABEL/RLABEL/OKLABEL variables should be set to the text to be displayed for each of the files set earlier.

Example:

UP: /ext/subghz/Fan1.sub
DOWN: /ext/subghz/Fan2.sub
LEFT: /ext/subghz/Door.sub
RIGHT: /ext/subghz/Garage3.sub
OK: /ext/subghz/Garage3l.sub
ULABEL: Fan ON
DLABEL: Fan OFF
LLABEL: Doorbell
RLABEL: Garage OPEN
OKLABEL: Garage CLOSE

Notes

• App Usage

  • Press a button to send the assigned capture file.

  • Press Back button to exit app.

• SubGHz Remote Map

  • File path should not have any spaces or special characters (- and _ excluded).

  • Labels are limited to 16 characters.

    • Why? This is to prevent overlapping elements on screen.

    • For example: If you set your label or file to WWWWWWWWWWWWWWW you'll be over the screen limits.