ODROID-XU3
The ODROID-XU3 is an octacore development board. Boasting 4 A15 cores and 4 A7 cores and 4GB of RAM, the ODROID-XU3 is a fast ARM device. Kali Linux fits on an external microSD card or on an eMMC module.
By default, the Kali Linux ODROID-XU3 image contains the kali-linux-default metapackage similar to most other platforms. If you wish to install extra tools please refer to our metapackages page.
Kali on ODROID-XU3/XU4 - Build-Script Instructions
Kali does not provide pre-built images for download, but you can still generate one by cloning the Kali-ARM Build-Scripts repository on GitLab, and follow the README.md file’s instructions. The script to use is odroid-xu3.sh.
Once the build script finishes running, you will have an “img.xz” file in the images directory where you ran the script from. At that point, the instructions are the same as if you had downloaded a pre-built image.
The easiest way to generate these images is from within a pre-existing Kali Linux environment.
Kali on ODROID-XU3/XU4 - User Instructions
To install Kali on your ODROID-XU3/XU4, follow these instructions:
Get a fast microSD card with at least 16GB capacity. Class 10 cards are highly recommended.
Use the dd utility to image this file to your microSD card (same process as making a Kali USB.
In our example, we assume the storage device is located at /dev/sdb. Do not simply copy these value, change this to the correct drive path.
This process will wipe out your microSD card. If you choose the wrong storage device, you may wipe out your computers hard disk.
This process can take a while, depending on your PC, your microSD card speed, and the size of the Kali Linux image.
Once the dd operation is complete, boot up the ODROID-C2 with the microSD card plugged in.
The same image file can be used for either eMMC or microSD card.
You should be able to log in to Kali.
Last updated